Sold
HAAS-GM-2 (6)
HAAS-GM-2 (5)
HAAS-GM-2 (3)
HAAS-GM-2 (4)
HAAS-GM-2 (2)

Haas GM-2 CNC Gantry Machining Center – 2024 Mill

SKU 115093
Make/Model Haas GM-2
Year 2024
Video No Video
Out of stock

Avoid Paying More! New Haas prices just went up 5% as of May 1st — plus, long lead times on new machines mean delays and higher costs. This 2024 Haas GM-2 is fully equipped with 15,000 RPM Spindle, WIPS- Wireless Intuitive Probing System, Probe Riser Block, TSC, HSM, Steel Table-Inch, Programmable Coolant Nozzle, Gantry Router Coolant System and Chip Auger.
“Replacement Cost Over $350,000 with Similar Options”

SKU: 115093
Make/Model: Haas GM-2
Year: 2024
Video: No Video
SKU: 115093

*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*

SKU: 115093
Make: Haas
Model: GM-2
Equipped With:
Haas CNC Control
15,000 RPM Spindle (Upgraded $15,995 value Included)
30 Station Side Mounted Automatic Tool Changer
Steel Table-Inch (Upgraded $20,895 value Included)
Through Spindle Coolant – 300 PSI (Upgraded $15,995 value Included)
WIPS- Wireless Intuitive Probing System (Upgraded $7,095 value Included)
Probe Riser Block (Upgraded $495 value Included)
Programmable Coolant Nozzle (Upgraded $2,395 value Included)
Gantry Router Coolant System (Upgraded $3,895 value Included)
Automatic Air Gun (Upgraded $1,595 value Included)
Auxiliary Coolant Filter (Upgraded $3,195 value Included)
WIFI Camera (Upgraded $995 value Included)
High Speed Machining (Upgraded $3,895 value Included)
32 GB Expanded Memory (Upgraded $1,695 value Included)
Rigid Tapping
Spindle Orientation
Coordinate Rotation and Scaling
Visual Part Programming System
Early Power Failure Detection Module
Chip Auger
Low Volt Transformer
Travels:
X-Axis: 145.0″
Y-Axis: 87.50″
Z-Axis: 22.0″
Distance Between Columns: 75″
Spindle Nose to Table (Min.- Max.): 4.0″- 26″
Feed rates: Rapid X Axis: 472 IPM
Feed rates: Rapid Y Axis: 1889 IPM
Feed rates: Rapid Z Axis: 1181 IPM
Cutting Feedrate: 472 IPM
Table:
Length: 144″
Width: 72″
Thickness: 1.0″
Max Weight on Table: 6,000 lbs
Spindle:
Taper Size: CAT-40
Speed Range: 15,000 RPM
Spindle Power: 30 HP
Automatic Tool Changer:
Capacity: 30 Station
Max Tool Weight: 12 lbs
Max Tool Length: 11″
Max Tool Dia.: 2.5 – 3.5″
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 3-Phase, 70 Kva
Floor Dimensions: 226″ X 143″ x 109″ High
Weight: 20,200 lbs.
Equipped With:
Haas CNC Control
15,000 RPM Spindle (Upgraded $15,995 value Included)
30 Station Side Mounted Automatic Tool Changer
Steel Table-Inch (Upgraded $20,895 value Included)
Through Spindle Coolant - 300 PSI (Upgraded $15,995 value Included)
WIPS- Wireless Intuitive Probing System (Upgraded $7,095 value Included)
Probe Riser Block (Upgraded $495 value Included)
Programmable Coolant Nozzle (Upgraded $2,395 value Included)
Gantry Router Coolant System (Upgraded $3,895 value Included)
Automatic Air Gun (Upgraded $1,595 value Included)
Auxiliary Coolant Filter (Upgraded $3,195 value Included)
WIFI Camera (Upgraded $995 value Included)
High Speed Machining (Upgraded $3,895 value Included)
32 GB Expanded Memory (Upgraded $1,695 value Included)
Rigid Tapping
Spindle Orientation
Coordinate Rotation and Scaling
Visual Part Programming System
Early Power Failure Detection Module
Chip Auger
Low Volt Transformer
Travels:
X-Axis: 3,683 mm
Y-Axis: 2,223 mm
Z-Axis: 559 mm
Distance Between Columns: 1,905 mm
Spindle Nose to Table (Min.- Max.): 102 mm- 660 mm
Feed rates: Rapid X Axis: 472 IPM
Feed rates: Rapid Y Axis: 1889 IPM
Feed rates: Rapid Z Axis: 1181 IPM
Cutting Feedrate: 472 IPM
Table:
Length: 3,658 mm
Width: 1,829 mm
Thickness: 25 mm
Max Weight on Table: 6,000 lbs
Spindle:
Taper Size: CAT-40
Speed Range: 15,000 RPM
Spindle Power: 30 HP
Automatic Tool Changer:
Capacity: 30 Station
Max Tool Weight: 12 lbs
Max Tool Length: 279 mm
Max Tool Dia.: 2.5 – 89 mm
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 3-Phase, 70 Kva
Floor Dimensions: 5,740 mm X 3,632 mm x 2,769 mm High
Weight: 20,200 lbs.
MakeHaas
ModelGM-2
CategoriesCNC Bridge / Gantry Mill
HAAS-GM-2 (6)HAAS-GM-2 (5)HAAS-GM-2 (3)HAAS-GM-2 (4)HAAS-GM-2 (2)

Payment Terms

Up to 3 buyers can reserve the same machine. If you're 2nd or 3rd in line, we'll tell you your place, and you'll get the next chance if the first buyer doesn't proceed.

Shipping & Logistics

We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.

Machine Inspection

Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.

Export & Documentation

For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.

You Might Like

Haas VF-2SS CNC Vertical Machining Center - 12,000 RPM, TSC Mill 0Haas VF-2SS CNC Vertical Machining Center - 12,000 RPM, TSC Mill 1
New Arrival
Fanuc M-70iC/20L 6-Axis Industrial Robot 0Fanuc M-70iC/20L 6-Axis Industrial Robot 1
New Arrival
113590

Fanuc M-70iC/20L 6-Axis Industrial Robot

$18,000
Fanuc M-70iC/20L 6-Axis Industrial Robot 0Fanuc M-70iC/20L 6-Axis Industrial Robot 1
New Arrival
113591

Fanuc M-70iC/20L 6-Axis Industrial Robot

$18,000
Back to Top
Select Language
Product has been added to your cart
Max · MachineStation
Looking for a machine? I can check live inventory for you. 👋