*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Quaser |
| Model: | MV134E/15C |
| Condition: | Brand New |
| Features: |
|---|
| Powerful 20 HP H/L Shifting Spindle Motor |
| Digital Servo and Spindle Drives |
| 15,000 RPM Spindle with Chiller |
| AICC I Contour Control |
| Additional Tool and Work Offsets |
| 40 Block Look Ahead |
| 1280 Meters of Memory |
| Work Light |
| Machine Status Light |
| Rigid Tapping |
| Helical Interpolation |
| Custom Macro B High Speed Skip Function |
| PCMCIA Slot for Flash Memory & Modem Card |
| 8.4″ LCD Color Monitor with Graphics |
| RS232C Interface with Ethernet Connection |
| Full Machine Guarding High Speed 30 Tool Swing-Arm ATC |
| Balance Tooling for Spindle Warmup |
| Random Access Bi-directional Tool Magazine |
| 4th Axis Preparation |
| 45mm Y&Z Roller Guides-35mm X Linear Guide |
| Direct Coupled Servo Motors |
| Pre-Tensioned Hardened and Ground Ball screws |
| Cutting Air Blast / Spindle Air Blast |
| Remote Manual Pulse Generator |
| Belt Driven Spindle Motor |
| 290 PSI Coolant Through Spindel |
| Heavy Duty Coolant Pump |
| Circular Coolant Nozzle |
| BIG PLUS Dual Contact Spindle |
| Hand Held Coolant Gun |
| Dual Chip Augers |
| Scraper Type Chip Conveyor Low Profile |
| 16 gal./min. Chip Removal System |
| Full Chip, Coolant Guards with Top Cover |
| Headstock: |
|---|
| Motor : FANUC AC Digital Spindle Motor |
| Horsepower : 20 HP High/Low Shifting |
| Max Spindle Torque : 72.0 ft/lbs. |
| Maximum Speed : 15,000 RPM |
| Spindle : Coupled to Spindle |
| Spindle Nose to Table : 3.9″ ~ 26.0″ |
| Table: |
|---|
| Size : 37.0″ x 21.7″ |
| T-Slots No. Width, Pitch : 5 x 0.71″ x 3.93″ |
| Maximum Load : 1,102.3 lbs. |
| Table Height : 33.7″ |
| ATC System: |
|---|
| Tool Type : CT-40 (BT-40 Optional) |
| Tool Selection : Bi-directional Random Access |
| Max Tool Weight : 22.1 lbs. |
| Max Tool Length : 11.8 “ |
| Max Tool Diameter : 3.0″ / 5.9″ with empty adjacent pocket |
| Max Tool Capacity : 30 Standard (48, 60 Optional) |
| Tool Change Time : 1.5 sec (T-T) 4.1 sec (C-C) |
| Travels: |
|---|
| X-Axis : 26.0″ 2.4 Hp |
| Y-Axis : 22.5″ 2.4 Hp |
| Z-Axis : 22.1″ 3.4 Hp |
| General: |
|---|
| Machine Weight : 13,227 lbs. |
| Floor Space WxLxH : 80.7″ x 123.54″ 118.1″ |
| Main Power : 220v / 60Hz 23kVA |
| Coolant Specifications: |
|---|
| Coolant Tank Capacity : 92.4 gal |
| Spindle Coolant Nozzle : 19.8 gal. 43.5 psi |
| Coolant Through Spindle : 290 psi / 6.6 gal. |
| Wash Down : 16 psi / 19.8 gal. |
| Power Requirements: |
|---|
| Air Requirements : 85 psi min. with ½” supply line. |
| Line Voltage : 220 VAC 3 phase. |
| Power Consumption : 23 kVA |
