*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Okuma |
| Model: | Genos M560-V |
| Year: | 2018 |
| Condition: | Used- Good |
| Machine Type: | 4-Axis CNC Vertical Machining Center |
| Control: | Okuma OSP-P300MA CNC Control |
| Cutting Hours: | Only 375 Hours |
| Country of Origin: | Japan |
| Features: |
|---|
| Okuma OSP-P300MA CNC Control |
| 4th Axis Ready |
| 15,000 RPM Spindle |
| CAT 40 Big Plus Spindle |
| 32 Position Automatic Tool Changer |
| Renishaw Tool & Part Probe System |
| MP Systems UL High-Pressure Coolant Pump |
| 300 PSI Through Spindle Coolant |
| LNS Chip Conveyor |
| Losma Icarus Mist Collector |
| Rigid Tapping |
| Full Enclosure |
| USB Interface |
| Tool Holders Included |
| Hivot Tool Storage Rack |
| Capacity: |
|---|
| Table Size: 51.18″ x 22.05″ |
| Table Load Capacity: Approx. 2,000 lbs |
| Maximum Tool Weight: Approx. 17.6 lbs |
| Maximum Tool Length: Approx. 11.8″ |
| Travels: |
|---|
| X-Axis Travel: 41.34″ |
| Y-Axis Travel: 22.05″ |
| Z-Axis Travel: 18.11″ |
| Spindle: |
|---|
| Spindle Speed: 15,000 RPM |
| Spindle Taper: CAT 40 Big Plus |
| Spindle Motor: Approx. 20 HP |
| Through Spindle Coolant: 300 PSI |
| Automatic Tool Changer: |
|---|
| Automatic Tool Changer Capacity: 32 Tools |
| Tool Change Type: Automatic |
| Maximum Tool Diameter: Approx. 3.1″ |
| Maximum Tool Length: Approx. 11.8″ |
| Feed Rates: |
|---|
| Rapid Traverse Rate: Approx. 1,417 IPM |
| Cutting Feed Rate: Programmable |
| Electrical: |
|---|
| Power Requirement: 208/230V / 3-Phase / 60 Hz |
| Air Requirement: Typical – Verify |
| General: |
|---|
| Machine Weight: Approx. 15,000 lbs |
| Machine Dimensions: Approx. 110″ x 95″ x 105″ |
