| HAAS MINI MILL VMC 4th AXIS READY | |
|---|---|
| Make | Haas |
| Model No. | Mini Mill |
| Year of Manufacture: | 2001 |
| Serial # | 24004 |
| Condition | Very Good |
All specifications are approximations and are subject to verification.
“This One Owner Machine has only 3920 Spindle Hours. All Original Paint Machine, 4th Axis Ready. On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*”
- HAAS MINI MILL VMC 4th AXIS READY Features:
- Spindle Time 3920 Hours
- 4th Axis Ready ( drives and wiring installed )
- 1 MB Program Memory
- Rigid Tapping
- Advanced Tool Management
- Power Failure Detection Module
- User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
- 10 Station automatic tool changer
- Programmable coolant
- Telescopic way covers
- Floppy Drive
- Coolant system
- HAAS MINI MILL VMC 4th AXIS READY Specifications:
- Travels:
- X-Axis: 16″
- Y-Axis: 12″
- Z-Axis: 10″
- Rapid Traverse Rates: 600 Inch Per Minute
- Cutting Feed Rates: 500 Inch Per Minute
- Spindle Nose to Table (Min.- Max.): 4″ – 14″
- Table:
- Length: 36″
- Width: 12″
- Number of Std T-Slots: 3
- T-Slot Width: 5/8″
- Max Weight on Table: 500 lbs
- Spindle:
- Taper Size: CAT 40
- Speed Range: 0 – 6000 RPM
- Spindle Power: 7.5 HP Vector Dual Drive
- Automatic Tool Changer:
- Capacity: 10
- Max Tool Weight: 12 lbs
- Max Tool Dia: 3.5″
- Tool Changing Time: 3.6 Seconds
- General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 66FLA / 3-Phase
- Overall Dimensions: 84″ x 74″ x 100″ High
- Weight: 3400 lbs
HAAS MINI MILL VMC 4th AXIS READY Comes as shown in pictures.. Check video.
