*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Mighty Viper |
| Model: | PRW-5340 |
| Year: | 2007 |
| Serial: | 008915 |
| Condition: | Very Good |
| Equipped With: |
|---|
| Fanuc 21i-MB CNC Control |
| 204.72″ X 118.11″ Table |
| 60 Station Side Mount Tool Changer ( Upgrade ) |
| 50 Taper Geared Head 6000 RPM Spindle |
| 90° Right Angle Head ( $35,000 Value ) |
| Powerful 35 HP high torque spindle motor |
| 500MB expanded memory |
| Air Blast thru Spindle |
| High Splash Guards around the Machine |
| PCMCIA Card Slot |
| RS-252 Port |
| Spindle Orientation |
| Box Way Construction |
| Portable manual pulse generator |
| Flood coolant with large separate coolant tank |
| Base Flush Chip Disposal with Dual Auger |
| Chip Conveyor |
| Spindle Chiller Unit |
| Levelling Pads |
| Books and Manuals |
| Replacement Cost over $750,000.00 |
| Travels: |
|---|
| X-Axis: 200.79″ |
| Y-Axis: 133.86″ |
| Z-Axis: 42.13″ |
| Distance Between Columns: 140.16″ |
| Spindle Nose to Table (Min.- Max.): 8.86″- 39.57″ |
| Table: |
|---|
| Length: 204.72″ |
| Width: 118.11″ |
| T-Slot: 1.1″ Wide X 15 X 7.87″ |
| Max Weight on Table: 35,273 lbs |
| Spindle: |
|---|
| Taper Size: 50 |
| Speed Range: 6000 RPM |
| Spindle Power: 35 HP |
| Feed Rates: |
|---|
| Rapid X,Y & Z: 472 inch/P.M |
| Cutting Feedrate: .04″ – 276″ inch/ P.M |
| Automatic Arm Type Tool Changer: |
|---|
| 50 Taper |
| Capacity: 60 |
| Max Tool Weight: 44 lbs |
| Max Tool Length: 13.77″ |
| Max Tool Dia.: 7.87″ |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 205-235v / 66FLA / 3-Phase, 40 Kva |
| Overall Dimensions: 528″ x 240″ x 168″ High |
| Shipping Dimensions change upon Dismantling before removal |
| Hydraulic Unit, Chip Conveyor, Chiller unit Extra |
| Weight: 140,600 lbs. |
