| SKU | 1965 |
| Make | Okuma |
| Model No. | Crown 769S |
| Year | 2000 |
| Serial # | 0234 |
| Condition | Very Good |
| Okuma Crown 769S L1420/1250 Equipped With: |
|---|
| 12-Station Turret |
| OSP-U10L CNC Control |
| One Touch IGF Programming |
| Floppy Drive |
| 12″ Kitagawa B212Hydraulic Chuck |
| Hydraulic Tailstock with Power Quill |
| Chip Pan and Chip Conveyor |
| Coolant System |
| Automatic Lubrication system |
| Foot Operated Control for Chuck and Tailstock |
| Books and Manuals |
| 3 X Boring bar holders |
| Levelling pads |
| Okuma Crown 769S L1420/1250 Specifications: |
|---|
| Max Turning Diameter: 14.17″ |
| Max Turning Length: 49.21″ |
| Max Bar Capacity: 3.15″ |
| Swing Over Slide: 15.78″ |
| Swing Over Bed: 24.41″ |
| Distance Between Centers: 50.4″ |
| Travel: |
|---|
| X Axis Travel: 9.1″ |
| Z Axis Travel: 50.01″ |
| Rapid Traverse X Axis: 591 IPM |
| Rapid Traverse Z Axis: 787 IPM |
| Spindle: |
| Spindle Nose: A2-8 |
| Spindle Bore: 3.54″ |
| Spindle Speed: 3500 RPM |
| Spindle Motor: 30 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 1 Second |
| Tailstock: |
|---|
| Tailstock Body Travel: 34.3″ |
| Tailstock Quill Dia.: 3.94″ |
| Tailstock Quill Stroke: 4.72″ |
| Tailstock Taper: MT-5 |
| General: |
|---|
| Power Source: AC 220 V, Three Phase, 60 Hz |
| Power Requirement: 42 kva |
| Overall Dimensions: 140″ x 76″ x 80″ High |
| Overall Dimensions: 160″ x 76″ x 80″ High with Chip Conveyor |
| Weight : 13,500 lbs Approx. |
