*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | OKAMOTO |
| Model: | OGM 12-60P |
| Year: | 1995 |
| Equipped With: |
|---|
| Fanuc 21-GA CNC Control |
| Absolute/Incremental Combined Programming |
| 4 x Subprograms |
| Swivelable Table |
| MPG Control |
| 2 X Steady Rests |
| Inch / Metric Conversion |
| Stored Stroke Check |
| Auto Reference Point Return |
| Automatic Acceleration & Deceleration |
| Coolant System |
| Automatic Lubrication system |
| Manuals |
| Capacity: |
|---|
| Max Grinding Diameter: 11.81″ |
| Max Grinding Length: 62.99″ |
| Max load Capacity: 330 lbs |
| Swing Over Table: 12.59″ |
| Distance Between Centers: 63.0″ |
| Grinding Wheel: |
|---|
| Speed: 1742 RPM |
| wheel Size: 16″ X 2″ X 5″ |
| Wheelhead: |
|---|
| X Axis Infeed Travel: 11.81″ |
| Handfeed Travel: 7.9” |
| Least Travel Increment: 0.0001” |
| Rapid Feed Rate: 158″ |
| Cont. Feed Rate: 0.0001″ to 158″ |
| Motor: 7.5 HP |
| Workhead: |
|---|
| Center Taper: MT-4 |
| Spindle Bore Dia.: 0.68″ |
| Speed: 10-500 RPM |
| Motor: 1 HP |
| Table: |
|---|
| Z Axis Travel: 68.89″ |
| Swivel Angle: +2 /- 6° |
| Least Travel Increment: 0.0001” |
| Rapid Feed Rate: 393″ |
| Cont. Feed Rate: 0.0001″ to 393″ |
| Tailstock: |
|---|
| Tailstock Quill Stroke: 1.18″ |
| Tailstock Taper: MT-4 |
| General: |
|---|
| Power Source: AC 220 V Three Phase 60 Hz |
| Power Requirement: 20 kva |
| Overall Dimensions: 245″ x 75″ x 66″ High Approx. |
| Weight : 11200 lbs Approx. |
