*All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | OKUMA |
| Model: | LAW-2S Wheelmaster |
| Year: | 2023 |
| Features: |
|---|
| Okuma OSP-P300LA CNC Control |
| Simultaneous 4-Axis Turning Capability |
| Dual Turret Configuration |
| Upper V6 6-Station Turret |
| Lower V4 4-Station Turret |
| A2-8, 3,000 RPM Spindle |
| 75 HP Spindle Motor |
| Rigid Tapping |
| Foot Switch |
| Capacity: |
|---|
| Maximum Turning Diameter – Upper Turret: 24.80″ |
| Maximum Wheel Size: 20″ |
| Swing Over Bed: 31.10″ |
| Swing Over Saddle: 20.87″ |
| Travels: |
|---|
| X1-Axis / Cross Slide Travel: 14.96″ |
| Z1-Axis / Saddle Travel: 34.06″ |
| X2-Axis / Cross Slide Travel: 9.84″ |
| Z2-Axis / Saddle Travel: 35.35″ |
| Rapid Traverse Z-Axis: 787 IPM |
| Rapid Traverse X-Axis: 591 IPM |
| Spindle: |
|---|
| Spindle Speed Range: 200 – 3,000 RPM |
| Spindle Nose: A2-8 |
| Spindle Bore Diameter: 2.09″ |
| Spindle Motor: 75 HP / 60 HP (20-Minute / Continuous) |
| Upper Turret: |
|---|
| Turret Type: V6 |
| Number of Tool Stations: 6 |
| Lower Turret: |
|---|
| Turret Type: V4 |
| Number of Tool Stations: 4 |
| General: |
|---|
| Power Supply: 200 V / 3-Phase / 50 Hz |
| Rated Capacity: 76.9 kVA |
| Machine Dimensions (W × D × H): 195.79″ × 101.57″ × 112.20″ Approx. |
| Machine Weight: 25,300 lbs Approx. |
