New Arrival
Haas DT-2 CNC Drill Tap Center – 2017 15,000 RPM, WIPS, HSM Mill
Reserve your machine by paying: $999 (Refundable)
(We’ll hold it for 7 business days while you inspect or finalize your purchase)
$999
1 in stock
Avoid Paying More! New Haas prices just went up 5% as of May 1st — plus, long lead times on new machines mean delays and higher costs. This 2017 Haas DT-2 is fully equipped with 15,000 RPM Spindle, Wireless Intuitive Probing System, High Speed Machining and Dual Chip Auger .
“Replacement Cost Over $95,000 with Similar Options”
| Location: | Lake Elsinore, CA |
| SKU: | 112895 |
| Make/Model: | Haas DT-2 |
| Year: | 2017 (Installed in 2018) |
| Condition: | Used – Excellent |
| Video: | No Video |
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | HAAS |
| Model: | DT-2 |
| Year: | 2017 (Installed in 2018) |
| Condition: | Used – Excellent |
| Features: |
|---|
| Haas CNC Control |
| Linear Ways Construction |
| 15,000 RPM Spindle (Upgraded $13,995 value Included) |
| BT-30 Spindle Taper |
| Wireless Intuitive Probing System (Probe Needed) (Upgraded $6,395 value Included) |
| High Speed Machining (Upgraded $3,895 value Included) |
| 20 Station Automatic Tool Changer |
| Advance Tool Management |
| Rigid Tapping |
| Spindle Orientation |
| 1GB Memory |
| Visual Part Programming System |
| User-Definable Macros |
| Coordinate Rotation and Scaling |
| Coolant System |
| Dual Chip Auger (Upgraded $4,095 value Included) |
| Levelling Pads |
| Travels: |
|---|
| X-Axis: 28.0″ |
| Y-Axis: 16.0″ |
| Z-Axis: 15.5″ |
| Rapid Traverse Rates: 2400 Inch Per Minute |
| Cutting Feed Rates: 1200 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 6″ – 21.5″ |
| Table: |
|---|
| Length: 34.0″ |
| Width: 15.0″ |
| Number of Std T-Slots: 3 |
| T-Slot Width: 5/8″ |
| Max Weight on Table: 500 lbs |
| Spindle: |
|---|
| Taper Size: BT-30 |
| Max Speed: 15,000 RPM |
| Max Tapping Speed: 5,000 RPM |
| Spindle Power: 15 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 20 Tools |
| Max Tool Weight: 5.5 lbs |
| Max Tool Dia: 2.0″ |
| Max Tool Length: 7″ |
| Tool Changing Time: 2 Seconds |
| General: |
|---|
| Air Required: 100 psi 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 100″ x 91″ x 99″ High |
| Weight: 5,350 lbs |
| Model | DT-2 |
|---|---|
| Categories | CNC Vertical Machining Center |
| Make |
Related Products
Sale
New Arrival
