*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make | Haas |
| Model: | VF-2TR |
| Year: | 2011 |
| Features: |
|---|
| Haas CNC Control |
| Haas TR-160 Trunnion Table |
| 10,000 RPM Spindle (Upgraded $7,595 value Included) |
| 30 Station Automatic Tool changer |
| CAT-40 Taper Spindle |
| 30 HP High Torque Spindle |
| Programmable Coolant Nozzle |
| MPG Handwheel Control |
| Automatic Lubrication System |
| Rigid Tapping |
| Coolant System |
| Chip Auger |
| Travels: |
|---|
| X-Axis: 30″ |
| Y-Axis: 16″ |
| Z-Axis: 20″ |
| Spindle Nose to Table (Min.- Max.): 4″ – 24″ |
| Spindle Nose to Plater (Min.- Max.): 5.4″ – 14.6″ |
| Rapid Traverse Rates: 1000 Inch Per Minute |
| Cutting Feed Rates: 650 Inch Per Minute |
| Trunnion Table: |
|---|
| Plater Diameter: 6.30″ |
| Max Weight on Plater: 80 lbs |
| Max Part Swing (reduced at tilt angles > ± 90°): 18″ |
| T-Slot Width: 0.625″ |
| Table: |
|---|
| Length: 36.0″ |
| Width: 14.1″ |
| T-Slot Width: 5/8″ |
| Number of Std T-Slots: 3 |
| Max Weight on Table (evenly distributed): 3,000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 10,000 RPM |
| Spindle Power: 30 HP |
| Vector Drive Max Torque: 90 ft-lb @ 2000 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station |
| Max Tool Weight: 12 lbs |
| Max Tool Dia: 2.5″ – 5.0″ |
| Max Tool Length (from gage line): 11.0″ |
| Tool Changing Time: 2.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 101″ x 99″ x 101″ High |
| Machine Weight: 8,300 lbs |
