Sold
Haas VF-5/50 CNC Vertical Machining Center (2013) – CT50, High Torque, 50 Taper
SKU
11311
Make/Model
HAAS VF-5/50
Year
2013
Video
On Request
Out of stock
| SKU: | 11311 |
| Make/Model: | HAAS VF-5/50 |
| Year: | 2013 |
| Video: | On Request |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images.
Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Haas |
| Model No.: | VF-5/50 |
| Year of Manufacture: | 2013 |
| Machine Type: | CNC Vertical Machining Center |
| CNC Control: | HAAS CNC Control |
| Country of Origin: | USA |
| Equipped With: |
|---|
| HAAS CNC Control |
| CT50 Spindle |
| Chip Conveyor |
| Coolant System |
| Rigid Tapping |
| Programmable Coolant |
| High Torque Spindle |
| Full Enclosure |
| Capacity: |
|---|
| Table Size: 52″ x 23″ |
| Table Load Capacity: 4,000 lbs |
| Travels: |
|---|
| X-Axis Travel: 50″ |
| Y-Axis Travel: 26″ |
| Z-Axis Travel: 25″ |
| Spindle: |
|---|
| Spindle Speed: 7,500 RPM |
| Spindle Taper: CT50 |
| Spindle Motor: 30 HP |
| Tool Changer: |
|---|
| Tool Capacity: 30+1 ATC |
| Tool Holder Type: CAT 50 |
| Feed Rates: |
|---|
| Rapid Traverse (X/Y): 800 IPM (Typical – Verify) |
| Rapid Traverse (Z): 800 IPM (Typical – Verify) |
| Cutting Feed Rate: Programmable |
| Electrical: |
|---|
| Voltage: 220V |
| Phase: 3 Phase |
| Frequency: 50/60 Hz |
| General: |
|---|
| Air Required: 100 PSI, 4 SCFM |
| Power: 220V / 66 FLA / 3-Phase |
| Overall Dimensions: 168″ x 101″ x 109″ High |
| Weight: 12,700 lbs |
| Equipped With: |
|---|
| HAAS CNC Control |
| CT50 Spindle |
| Chip Conveyor |
| Coolant System |
| Rigid Tapping |
| Programmable Coolant |
| High Torque Spindle |
| Full Enclosure |
| Capacity: |
|---|
| Table Size: 1,321 mm x 584 mm |
| Table Load Capacity: 4,000 lbs |
| Travels: |
|---|
| X-Axis Travel: 1,270 mm |
| Y-Axis Travel: 660 mm |
| Z-Axis Travel: 635 mm |
| Spindle: |
|---|
| Spindle Speed: 7,500 RPM |
| Spindle Taper: CT50 |
| Spindle Motor: 30 HP |
| Tool Changer: |
|---|
| Tool Capacity: 30+1 ATC |
| Tool Holder Type: CAT 50 |
| Feed Rates: |
|---|
| Rapid Traverse (X/Y): 800 IPM (Typical – Verify) |
| Rapid Traverse (Z): 800 IPM (Typical – Verify) |
| Cutting Feed Rate: Programmable |
| Electrical: |
|---|
| Voltage: 220V |
| Phase: 3 Phase |
| Frequency: 50/60 Hz |
| General: |
|---|
| Air Required: 100 PSI, 4 SCFM |
| Power: 220V / 66 FLA / 3-Phase |
| Overall Dimensions: 4,267 mm x 2,565 mm x 2,769 mm High |
| Weight: 12,700 lbs |
| Categories | CNC Vertical Machining Center |
|---|---|
| Make | Haas |
| Model | VF-5/50 |
Payment Terms
A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.
Shipping & Logistics
We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.
Machine Inspection
Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.
Export & Documentation
For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.
Related Products
New Arrival
New Arrival
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
