- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
Sold
Haas GM-2 CNC Gantry Machining Center – 2024 Mill
Out of stock
Avoid Paying More! New Haas prices just went up 5% as of May 1st — plus, long lead times on new machines mean delays and higher costs. This 2024 Haas GM-2 is fully equipped with 15,000 RPM Spindle, WIPS- Wireless Intuitive Probing System, Probe Riser Block, TSC, HSM, Steel Table-Inch, Programmable Coolant Nozzle, Gantry Router Coolant System and Chip Auger.
“Replacement Cost Over $350,000 with Similar Options”
| SKU: | 115093 |
| Make/Model: | Haas GM-2 |
| Year: | 2024 |
| Condition: | Used – Excellent |
| Video: | No Video |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| SKU: | 115093 |
| Make: | Haas |
| Model: | GM-2 |
| Condition: | Used – Excellent |
| Equipped With: |
|---|
| Haas CNC Control |
| 15,000 RPM Spindle (Upgraded $15,995 value Included) |
| 30 Station Side Mounted Automatic Tool Changer |
| Steel Table-Inch (Upgraded $20,895 value Included) |
| Through Spindle Coolant – 300 PSI (Upgraded $15,995 value Included) |
| WIPS- Wireless Intuitive Probing System (Upgraded $7,095 value Included) |
| Probe Riser Block (Upgraded $495 value Included) |
| Programmable Coolant Nozzle (Upgraded $2,395 value Included) |
| Gantry Router Coolant System (Upgraded $3,895 value Included) |
| Automatic Air Gun (Upgraded $1,595 value Included) |
| Auxiliary Coolant Filter (Upgraded $3,195 value Included) |
| WIFI Camera (Upgraded $995 value Included) |
| High Speed Machining (Upgraded $3,895 value Included) |
| 32 GB Expanded Memory (Upgraded $1,695 value Included) |
| Rigid Tapping |
| Spindle Orientation |
| Coordinate Rotation and Scaling |
| Visual Part Programming System |
| Early Power Failure Detection Module |
| Chip Auger |
| Low Volt Transformer |
| Travels: |
|---|
| X-Axis: 145.0″ |
| Y-Axis: 87.50″ |
| Z-Axis: 22.0″ |
| Distance Between Columns: 75″ |
| Spindle Nose to Table (Min.- Max.): 4.0″- 26″ |
| Feed rates: Rapid X Axis: 472 IPM |
| Feed rates: Rapid Y Axis: 1889 IPM |
| Feed rates: Rapid Z Axis: 1181 IPM |
| Cutting Feedrate: 472 IPM |
| Table: |
|---|
| Length: 144″ |
| Width: 72″ |
| Thickness: 1.0″ |
| Max Weight on Table: 6,000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-40 |
| Speed Range: 15,000 RPM |
| Spindle Power: 30 HP |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station |
| Max Tool Weight: 12 lbs |
| Max Tool Length: 11″ |
| Max Tool Dia.: 2.5 – 3.5″ |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 3-Phase, 70 Kva |
| Floor Dimensions: 226″ X 143″ x 109″ High |
| Weight: 20,200 lbs. |
| Make | |
|---|---|
| Model | GM-2 |
| Categories | CNC Bridge / Gantry Mill |
New Arrivals
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
