All specifications are approximations and are subject to verification.
“This machine is in very Good running condition. It is equipped with 10″ Big Bore Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”
| Make |
Okuma |
| Model No. |
ES-L10 |
| Year |
2004 |
| Serial # |
P0127 |
| Condition |
Very Good |
| Okuma ES-L10 Equipped With: |
| 12-Station Turret |
| OSP-U10L CNC Control |
| One Touch IGF Programming |
| Floppy Drive |
| 10″ Kitagawa Hydraulic Chuck |
| Hydraulic Tailstock with Power Quill |
| Chip Pan and Chip Conveyor |
| Coolant System |
| Automatic Lubrication system |
| Foot Operated Control for Chuck and Tailstock |
| Okuma ES-L10 Specifications: |
| Max Turning Diameter: 12.20″ |
| Max Turning Length: 19.68″ |
| Max Bar Capacity: 3.05″ |
| Swing Over Bed: 21.65″ |
| Distance Between Centers: 24.6″ |
| Travel: |
| X Axis Travel: 8.10″ |
| Z Axis Travel: 20.47″ |
| Rapid Traverse X Axis: 787 IPM |
| Rapid Traverse Z Axis: 984 IPM |
| Spindle: |
| Spindle Nose: A2-8 |
| Spindle Bore: 3.15″ |
| Spindle Speed: 30-3000 RPM |
| Spindle Motor: 20 HP |
| Turret: |
| Turret Capacity: 12 Stations |
| Turret Index Time: 0.5 Second |
| Tailstock: |
| Tailstock Body Travel: 14.3″ |
| Tailstock Quill Dia.: 3.54″ |
| Tailstock Quill Stroke: 3.93″ |
| Tailstock Taper: MT-5 |
| General: |
| Power Source: AC 220 V, Three Phase, 60 Hz |
| Power Requirement: 68 Amps |
| Overall Dimensions: 110″ x 68″ x 80″ High |
| Overall Dimensions: 140″ x 68″ x 80″ High with Chip Conveyor |
| Weight : 8500 lbs Approx. |
Okuma ES-L10 comes as shown in Pictures…..
