*All specifications are approximate and for reference only, based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.*
| Make: | TAKISAWA |
| Model: | TSL-1000D |
| Equipped With: |
|---|
| 8″ 3-Jaw Chuck |
| Hardened & Ground Bed Ways |
| 6-Speed Geared Headstock |
| Manual Tailstock |
| Power Longitudinal & Cross Feeds |
| Inch & Metric Thread Cutting |
| Capacity: |
|---|
| Swing Over Bed: 14.18″ |
| Swing Over Cross Slide: 8.27″ |
| Swing Over Gap (from Face Plate to 4″): 16.00″ |
| Distance Between Centers: 40.00″ |
| Height of Centers: 7.09″ |
| Bed: |
|---|
| Bed Length: 71.26″ |
| Bed Width: 10.83″ |
| Floor to Work Center: 41.54″ |
| Spindle: |
|---|
| Spindle Bore: 1.38″ |
| Spindle Nose: ASA A1-5 |
| Spindle Taper: MT No. 5 |
| Spindle Speed Range: 83 – 1,800 RPM |
| Number of Spindle Speeds: 6 |
| Main Spindle Motor: 5 HP |
| Tailstock: |
|---|
| Tailstock Taper: MT No. 3 |
| Feed Rates: |
|---|
| Number of Longitudinal Feeds: 36 |
| Longitudinal Feed Range: 0.0020″ – 0.1417″ per Revolution |
| Cross Feed: ½ of Longitudinal Feed |
| Number of Inch Threads: 31 |
| Inch Thread Range: 2 – 56 TPI |
| Number of Metric Threads: 18 |
| Metric Thread Range: 0.5 – 9.0 mm |
| General: |
|---|
| Overall Dimensions (L × W): 82″ × 28.5″ |
| Machine Weight: Approx. 2,645 lbs |
