Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | SUPERTEC |
| Model: | EGM-350 CNC |
| Year: | 2025 |
| Equipped With: |
|---|
| Fanuc 0i-TF Plus Series CNC Control |
| CNC Universal Internal / External Grinding |
| Dual Independent Grinding Wheelheads |
| Variable Speed Workhead Spindle |
| Absolute/Incremental Combined Programming |
| Swivelable Table |
| MPG Handwheel Control |
| Paper Filtration Coolant System |
| Coolant Tank |
| Hydraulic System |
| Note: Chuck, Tooling / Workholding Are Not Included with the Machine |
| Capacity: |
|---|
| Maximum Grinding ID Diameter: 11.8″ |
| Maximum Grinding OD Diameter: 15.7″ |
| Maximum Swing Over Table: 19.68″ |
| Maximum Grinding Depth: 10.2″ |
| Maximum Grinding Length: 11.8″ |
| Maximum Weight Load Capacity: 110 lbs |
| Type of Wheelhead: Dual Independent |
| Workhead: |
|---|
| Spindle Speed: 10–1,000 RPM |
| Spindle Type: A2-6 |
| Swiveling Angle Range: +15° to -5° |
| Motor Power: 3 HP |
| Grinding Wheelhead (Y-Axis): |
|---|
| ID Grinding Wheel Size: 3.93″ |
| ID Grinding Wheel Spindle Speed: 20,000 RPM |
| Spindle Motor Power: 5 HP |
| Grinding Wheelhead (Z-Axis): |
|---|
| OD Grinding Wheel Size: 3.93″ |
| OD Grinding Wheel Spindle Speed: 8,000 RPM |
| Spindle Motor Power: 5 HP |
| Travels & Feedrates: |
|---|
| X-Axis Travel: 16.5″ |
| Y-Axis Travel: 13.7″ |
| Z-Axis Travel: 13.7″ |
| Rapid Feedrates: 315 IPM |
| Minimum Increment Resolution (X/Y/Z Axis): 0.0001″ |
| Servo Motor Power (X/Y/Z Axis): 3 HP |
| General: |
|---|
| Power Source: AC 230V / 3-Phase / 60 Hz |
| Overall Dimensions: 132″ × 89″ × 77″ High Approx. |
| Weight: 13,860 lbs Approx. |
