*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Hyundai Kia |
| Model: | SKT-21LMS |
| Year: | 2007 |
| Condition: | Used – Good |
| Equipped With: |
|---|
- Fanuc 0i-TC CNC Control
- 8″ 3-Jaw Chuck on Main Spindle
- 5″ 3-Jaw Chuck on Sub Spindle
- Servo Controlled C Axis on Both Spindles
- Sub Spindle
- 12 Station Live Tool Turret
- Tool Presetter
- Part Catcher
- PCMCIA Card Interface
- RS-232 Port
- USB Port
- Coolant System
- Chip Conveyor
- Levelling Pads
- Foot Switch
- (1) Live Tool Holder (4) Statics Tool Holders Mounted on Turret (As shown in the images)
|
| Capacity: |
|---|
- Max Turning Diameter: 10.0″
- Max Turning Length: 20.9″
- Max Swing Over Bed: 21.7″
- Max Swing Over Cross Slide: 13.8″
- Max Bar Capacity: 2.56″
|
| Travels: |
|---|
- X Axis Travel: 8.3″
- Z Axis Travel: 21.7″
- B Axis Travel (Sub Spindle): 29.5″
- C Axis Indexing: 360 Degree (0.001)
- Rapid Traverse Rate X & Z Axis: 1417 IPM
- Rapid Traverse Rate B Axis: 1181 IPM
|
| Main Spindle: |
|---|
- Main Spindle Nose: A2-6
- Main Spindle Bore: 3.07″
- Main Spindle Bar Capacity: 2.56″
- Main Spindle Speed: 4000 RPM
- Man Spindle Motor: 20 HP
|
| Sub Spindle: |
|---|
- Sub Spindle Nose: Flat (115)
- Sub Spindle Bore: 1.69″
- Sub Spindle Bar Capacity: 1.3″
- Sub Spindle Speed: 6000 RPM
- Sub Spindle Motor: 5 HP
|
| Turret: |
|---|
- Turret Capacity: 12 Stations
- Turret Index Time: 0.2 Second
- Rotary Tool Speed: 4,000 RPM
- Rotary Tool Motor: 5 HP
- Tool Holders Type: VDI-40
|
| General: |
|---|
- Power Source: AC 220 V / Three Phase / 60 Hz
- Power Requirement: 30 kva
- Overall Dimensions: 120″ x 65″ x 83″ High Approx.
- Weight : 9,500 bs Approx.
|
