Sold
Haas VF-6/50 CNC Vertical Machining Center – 4th Axis Ready, 50 Taper Mill
Location
CA
SKU
112919
Make
HAAS
Model
VF-6/50
Year
2008
Condition
Used
Cutting Time
4,710 Hours
Video
On Request
Out of stock
| Location: | CA |
| SKU: | 112919 |
| Make: | HAAS |
| Model: | VF-6/50 |
| Year: | 2008 |
| Condition: | Used |
| Cutting Time: | 4,710 Hours |
| Video: | On Request |
Add to WishlistRemove from Wishlist
Add to Wishlist
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | HAAS |
| Model: | VF-6/50 |
| Year: | 2008 |
| Features: |
|---|
| Haas CNC Control |
| 4th Axis Wiring and Drive (Upgraded $3,795 value Included) |
| 7500 RPM High Torque Spindle |
| 30 HP 2 Speed Gear Drive |
| Through Spindle Coolant (Upgraded $7,495 value Included) |
| 30 Station Automatic Tool Changer |
| High Speed Machining (Upgraded $3,395 value Included) |
| MPG Hand Wheel Control |
| Spindle Orientation |
| Probing System Ready (Needed Reciever & Tool Probe) |
| Advance Tool Management |
| Rotation and Scaling |
| Macros |
| Quick Code |
| Enable DNC |
| Floppy Enable |
| Extended Memory |
| Extra Large Tools |
| Programmable Coolant |
| Coolant System |
| Chip Auger |
| Travels: |
|---|
| X-Axis: 64″ |
| Y-Axis: 32″ |
| Z-Axis: 30″ |
| Rapid Traverse Rates: 600 Inch Per Minute |
| Cutting Feed Rates: 500 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 5″ – 35″ |
| Table: |
|---|
| Length: 64″ |
| Width: 28″ |
| Number of Std T-Slots: 5 |
| T-Slot Width: 5/8″ |
| Max Weight on Table: 4000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-50 |
| Speed Range: 7500 RPM |
| Spindle Power: 30 HP |
| Vector Drive Max Torque: 340 ft-lb @ 700 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station Side Mounted |
| Max Tool Weight: 30 lbs |
| Max Tool Diameter (Full): 4″ |
| Max Tool Diameter (adjacent empty): 10″ |
| Max Tool Length: 16″ |
| Tool Changing Time: 4.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 195″ x 102″ x 132″ High Approx. |
| Weight: 25,500 lbs Approx. |
| Travels: |
|---|
| X-Axis: 1,626 mm |
| Y-Axis: 813 mm |
| Z-Axis: 762 mm |
| Rapid Traverse Rates: 600 Inch Per Minute |
| Cutting Feed Rates: 500 Inch Per Minute |
| Spindle Nose to Table (Min.- Max.): 127 mm - 889 mm |
| Table: |
|---|
| Length: 1,626 mm |
| Width: 711 mm |
| Number of Std T-Slots: 5 |
| T-Slot Width: 5/203 mm |
| Max Weight on Table: 4000 lbs |
| Spindle: |
|---|
| Taper Size: CAT-50 |
| Speed Range: 7500 RPM |
| Spindle Power: 30 HP |
| Vector Drive Max Torque: 340 ft-lb @ 700 RPM |
| Automatic Tool Changer: |
|---|
| Capacity: 30 Station Side Mounted |
| Max Tool Weight: 30 lbs |
| Max Tool Diameter (Full): 102 mm |
| Max Tool Diameter (adjacent empty): 254 mm |
| Max Tool Length: 406 mm |
| Tool Changing Time: 4.2 Seconds |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power: 220v / 66FLA / 3-Phase |
| Overall Dimensions: 4,953 mm x 2,591 mm x 3,353 mm High Approx. |
| Weight: 25,500 lbs Approx. |
| Make | Haas |
|---|---|
| Model | VF-6/50 |
| Categories | CNC Vertical Machining Centers |
Payment Terms
A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.
Shipping & Logistics
We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.
Machine Inspection
Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.
Export & Documentation
For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.
Related Products
New Arrival
New Arrival
New Arrival
New Arrival
Sold
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
