*All specifications are approximations and are subject to verification. Comes as shown in the images. Please call us if you have any questions before making a purchase. All sales are final.*
| Make: | Haas |
| Model: | VF-8/50 |
| Condition: | Used |
| Travels: |
|---|
- X-Axis Travel: 64″
- Y-Axis Travel: 40″
- Z-Axis Travel: 30″
- Spindle Nose to Table (Max): 35″
- Spindle Nose to Table (Min): 5″
|
| Table: |
|---|
- Table Length: 64″
- Table Width: 36″
- T-Slot Width: 5/8″
- T-Slot Center Distance: 4.92″
- Number of T-Slots: 7
- Max Table Load (Evenly Distributed): 4,000 lbs
|
| Spindle: |
|---|
- Spindle Taper: BT / CT 50
- Spindle Speed: 7,500 RPM
- Spindle Motor: 30 HP
- Max Torque: 340 ft-lb @ 700 RPM
- Drive System: 2-Speed Geared Head
- Bearing Lubrication: Air/Oil Injection
- Cooling: Liquid Cooled
|
| Spindle (Optional): |
|---|
- Optional Spindle Speed: 10,000 RPM
- Optional Spindle Motor: 30 HP
- Max Torque (Optional): 250 ft-lb @ 700 RPM
- Drive System: 2-Speed Geared Head
|
| Feedrates: |
|---|
- Rapid Traverse X-Axis: 600 IPM
- Rapid Traverse Y-Axis: 600 IPM
- Rapid Traverse Z-Axis: 600 IPM
- Max Cutting Feedrate: 500 IPM
|
| Axis Motors: |
|---|
- Max Thrust X-Axis: 3,400 lbs
- Max Thrust Y-Axis: 4,100 lbs
- Max Thrust Z-Axis: 5,600 lbs
|
| Tool Changer: |
|---|
- Tool Changer Type: SMTC
- Tool Capacity: 30 + 1
- Max Tool Diameter (Adjacent Empty): 10″
- Max Tool Diameter (Full): 4″
- Max Tool Length: 16″
- Max Tool Weight: 30 lbs
- Tool-to-Tool Time (Avg): 4.2 sec
- Chip-to-Chip Time (Avg): 6.3 sec
|
| General: |
|---|
- Air Required: 4 SCFM @ 100 PSI
- Coolant Capacity: 95 Gallons
|
