*All specifications are approximations and are subject to verification. Comes as shown in the images.
Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: |
Haas |
| Model No.: |
VF-4SS |
| Year of Manufacture: |
2011 |
| Condition: |
Used – Good |
| Machine Type: |
CNC Vertical Machining Center |
| CNC Control: |
Haas CNC Control |
| Equipped With: |
| Haas CNC Control |
| 5-Axis Trunnion Rotary Table (4th & 5th Axis) |
| Super Speed (SS) High-Speed Package |
| Inline Direct Drive Spindle |
| Side Mount Tool Changer |
| 30+1 Tool Magazine |
| Programmable Coolant Nozzle |
| Chip Auger / Chip Conveyor |
| Coolant System |
| Rigid Tapping |
| High-Speed Machining (HSM) |
| USB / Ethernet Interface |
| Work Light |
| Fully Enclosed Guarding |
| Pre-Wired for 4th & 5th Axis |
| Capacity: |
| Table Size: 52″ × 18″ |
| Max Table Load: 1,750 lbs |
| Travels: |
| X Axis Travel: 50″ |
| Y Axis Travel: 20″ |
| Z Axis Travel: 25″ |
| Spindle Nose to Table: 4.2″ – 29.2″ |
| Rapid Traverse (X/Y/Z): 1,400 IPM |
| Cutting Feed Rate: 833 IPM |
| Spindle: |
| Spindle Taper: CAT 40 / BT40 |
| Spindle Speed: 12,000 RPM |
| Spindle Motor: 30 HP |
| Max Torque: 90 ft-lb @ 2,000 RPM |
| Drive System: Inline Direct Drive |
| Tooling System: |
| Tool Magazine Capacity: 30+1 Tools |
| ATC Type: Side Mount Automatic Tool Changer |
| Tool-to-Tool Time: ~1.8 sec |
| Chip-to-Chip Time: ~2.4 sec |
| Max Tool Length: 13″ |
| Max Tool Weight: 12 lbs |
| Axis Motors (Thrust): |
| X Axis Thrust: 3,085 lbf |
| Y Axis Thrust: 3,085 lbf |
| Z Axis Thrust: 3,925 lbf |
| 5-Axis Capability: |
| Type: Trunnion / Rotary Table |
| Simultaneous 5-Axis Machining Capability |
| Full 4th & 5th Axis Interpolation |
| General: |
| Power Requirement: 220V / 3-Phase / 50/60 Hz |
| Full Load Current: ~70 Amps |
| Air Requirement: 4 scfm @ 100 psi |
| Coolant Capacity: 55 Gallons |
| Machine Dimensions: ~152″ × 99″ × 106″ |
| Weight: 11,700 – 13,500 lbs |
| Features: |
| Super Speed Model for High Production Environments |
| Full 5-Axis Machining for Complex Parts |
| Inline Direct Drive Spindle for High Accuracy |
| Fast Tool Change & High Rapid Rates |
| Rigid Construction for Precision & Stability |
| Excellent Surface Finish Capability |
| User-Friendly Haas Control |
| Reduced Cycle Time with High-Speed Machining |
| Ideal for Aerospace, Medical & Precision Components |
| Automation Ready (Pallet Pool / Robotics) |
