*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | OKUMA |
| Model: | SIMULTURN LU-400 2SC 650 |
| Year: | 2005 |
| Machine Type: | Dual Turret CNC Turning Center |
| CNC Control: | Okuma OSP-P100 |
| Equipped With: |
|---|
| Okuma OSP-P100 CNC Control |
| Dual Turret Configuration |
| 12-Station Upper Turret |
| 10-Station Lower Turret |
| Hydraulic Chuck System |
| Tailstock |
| Chip Conveyor |
| Capacity: |
|---|
| Maximum Turning Diameter: 16.54″ |
| Maximum Turning Length: 25.59″ |
| Maximum Bar Capacity: 3.15″ / 4.33″ |
| Maximum Swing Over Bed: 25.59″ |
| Maximum Swing Over Carriage: 16.54″ |
| Distance Between Centers: 26.59″ |
| Maximum Weight Between Centers: 1,320 lbs |
| Travels: |
|---|
| Upper Turret X-Axis Travel: 11.73″ |
| Lower Turret X-Axis Travel: 7.67″ |
| Upper Turret Z-Axis Travel: 26.57″ |
| Lower Turret Z-Axis Travel: 26.38″ |
| X-Axis Rapid Traverse: 984 IPM |
| Z-Axis Rapid Traverse: 984 IPM |
| Spindle: |
|---|
| Spindle Bore: 3.5″ |
| Spindle Nose: A2-8 |
| Spindle Speed Range: 45–3,800 RPM |
| Main Spindle Motor Power: 35 HP |
| Turret: |
|---|
| Upper Turret Capacity: 12 Stations |
| Lower Turret Capacity: 10 Stations |
| Tailstock: |
|---|
| Tailstock Taper: MT5 |
| Tailstock Quill Diameter: 3.94″ |
| Tailstock Quill Travel: 5.91″ |
| Electrical: |
|---|
| Power Source: 220/480V / 3-Phase / 50/60 Hz |
| General: |
|---|
| Machine Dimensions (With Chip Conveyor): 169″ × 85″ × 86″ High |
| Machine Weight: 19,800 lbs |
