Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | Haas |
| Model: | SL-30T |
| Year: | 2001 |
| Features: |
|---|
| Haas CNC Control |
| 10″ 3-Jaw Samchully SH-10 Chuck |
| 12-Station Bolt-On Turret |
| 30 HP Vector Dual Drive |
| A2-6 Spindle |
| Tool Presetter |
| 3.5″ Big Bore Spindle |
| Programmable Tailstock |
| Coolant Tank |
| Chip Auger |
| Foot Switch |
| Leveling Pads |
| (4) Boring Tool Holders Mounted on Turret (As Shown in the Images) |
| Capacity: |
|---|
| Maximum Turning Diameter: 15.0″ |
| Maximum Swing Over Bed: 21.0″ |
| Maximum Turning Length: 34.0″ |
| Maximum Bar Capacity: 3.0″ |
| Travels: |
|---|
| X-Axis Travel: 9.4″ |
| Z-Axis Travel: 32.5″ |
| Feedrate: |
|---|
| Rapid Traverse X-Axis: 710 IPM |
| Rapid Traverse Z-Axis: 710 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-6 |
| Spindle Bore: 3.5″ |
| Spindle Speed: 3,400 RPM |
| Spindle Motor: 30 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 1 Second |
| Turret Type: Bolt-On Turret |
| Tailstock: |
|---|
| Tailstock Taper: MT-4 |
| Tailstock Type: Programmable |
| General: |
|---|
| Air Required: 100 psi, 4 scfm |
| Power Source: AC 220V / 230V / 3-Phase / 50/60 Hz |
| Machine Dimensions: 170″ × 90″ × 98″ High Approx. |
| Machine Weight: 11,000 lbs Approx. |
