*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Daewoo |
| Model: | Puma 230C |
| Year: | 2003 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Fanuc 21i-TB CNC Control |
| 10″ 3-Jaw Kitagawa Hydraulic Chuck |
| 12 Station Automatic Turret |
| Automatic Tool Presetter |
| Parts Catcher |
| Tailstock |
| Rigid Tapping |
| PCMCIA Card Slot |
| Coolant Tank and Pump |
| Mayfran Chip Conveyor |
| Foot Switches |
| Levelling Pads |
| Books & Manuals |
| Misc. Statics Tool Holders Mounted on Turret (As shown in the images) |
| Capacity: |
|---|
| Max Turning Diameter: 11.42″ |
| Max Swing Over Bed: 21.65″ |
| Max Swing Over Saddle: 15.35″ |
| Max Turning Length: 19.37″ |
| Max Bar Capacity: 3.0″ |
| Travels: |
|---|
| X Axis Travel: 8.07″ |
| Z Axis Travel: 22.83″ |
| Feedrate: |
|---|
| Rapid Traverse X Axis: 787 IPM |
| Rapid Traverse Z Axis: 984 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-8 |
| Spindle Bore: 3.54″ |
| Spindle Speed: 3500 RPM |
| Spindle Motor: 20 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 1 Second |
| Tool Holders Type: BMT |
| Tailstock: |
|---|
| Tailstock Taper: MT-4 |
| Tailstock Quill Dia.: 2.9″ |
| Tailstock Quill Travel: 3.15″ |
| General: |
|---|
| Power Source: AC 220v / 3-Phase / 60 Hz |
| Power Requirement: 32.20 kva |
| Overall Dimensions: 117″ x 64″ x 69″ High Approx. |
| Machine Weight: 9,060 lbs Approx. |
