*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | DAVI |
| Model: | MCB 3070 WT |
| Year: | 2009 |
| Condition: | Used – Good |
| Machine Type: | CNC Hydraulic 4-Roll Plate Bending Machine |
| Country of Origin: | Italy |
| Equipped With: |
|---|
- CNC Control System (DAVI / Siemens-Based – Model Dependent)
- 4-Roll Hydraulic Plate Bending Configuration
- Wide Top Roll (WT) for Heavy Plate Forming
- Hydraulic Roll Positioning
- Parallel & Cone Bending Capability
- Digital Roll Position Readout
- Hardened & Ground Rolls
- Centralized Lubrication System
- Safety Wire & Emergency Stop System
- Hydraulic Drop-End for Easy Part Removal
- Heavy-Duty Welded Steel Frame
|
| Capacity (Approx.): |
|---|
- Maximum Plate Width: 118″ (3,000 mm)
- Maximum Plate Thickness (Pre-Bending): Approx. 2.0″ (50 mm)
- Maximum Plate Thickness (Rolling): Approx. 2.4″ (60 mm)
- Minimum Rolling Diameter (Top Roll): Approx. 20″ (500 mm)
- Material: Mild Steel (A36 Equivalent)
- Capacity Varies with Material Yield Strength & Roll Diameter
|
| Rolls: |
|---|
- Top Roll Diameter: Approx. 27.5″ (700 mm)
- Bottom Roll Diameter: Approx. 25.6″ (650 mm)
- Side Roll Diameter: Approx. 23.6″ (600 mm)
- Roll Material: Forged Steel, Induction Hardened
- Roll Adjustment: Fully Hydraulic
|
| CNC Control: |
|---|
- Automatic Bending Cycles
- Plate Positioning & Memory Programs
- Pre-Bending Control
- Cone Bending Functions
- Digital Axis Display
- Manual & Automatic Operating Modes
|
| Hydraulics: |
|---|
- High-Pressure Hydraulic System
- Proportional Valves for Smooth Roll Movement
- Hydraulic Motor Drive
- Integrated Oil Cooling System
|
| Electrical: |
|---|
- Power Requirement: 400 – 480 V / 3-Phase
- Frequency: 50 / 60 Hz
- Control Voltage: 24 VDC
- Main Motor Power: Approx. 55 – 75 HP
|
| General: |
|---|
- Approx. Machine Weight: 80,000 – 90,000 lbs
- Construction: Heavy-Duty Welded Steel Frame
- Industrial Plate Rolling Machine for Heavy Fabrication
- Manufacturing Year: 2009
|
| Typical Applications: |
|---|
- Pressure Vessels
- Wind Tower Sections
- Structural Steel Fabrication
- Heavy Cylinders & Cones
- Oil & Gas Components
- Shipbuilding & Heavy Industry
|
