*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Takisawa |
| Model: | NEX-108 |
| Year: | 2010 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Takisawa Turn-i Fanuc CNC Control |
| Linear Ways Construction |
| 8″ 3-Jaw Hydraulic Chuck |
| 12-Station Automatic Turret |
| Tool Presetter |
| Tailstock |
| PCMCIA Card Interface |
| Rigid Tapping |
| Coolant System |
| Automatic Lubrication system |
| Foot Switch |
| Chip Conveyor |
| Capacity: |
|---|
| Max Turning Diameter: 12.60″ |
| Max Turning Length: 18.93″ |
| Swing Over Bed: 15.75″ |
| Swing Over Cross Slide: 12.60″ |
| Max Bar Capacity: 2.04″ |
| Travels: |
|---|
| X Axis Travel: 7.08″ |
| Z Axis Travel: 20.87″ |
| Rapid Traverse X Axis: 945 IPM |
| Rapid Traverse Z Axis: 945 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-6 |
| Spindle Bore: 2.48″ |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 15 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turning Tool Shank: 1.0″ |
| Boring Bar Shank Diameter: 1.57″ |
| Tool Holders Type: Bolt Mounted |
| Tailstock: |
|---|
| Tailstock Taper: MT-4 |
| Tailstock Body Travel: 16.73″ |
| Tailstock Quill Diameter: 2.95″ |
| Tailstock Quill Travel : 3.93″ |
| General: |
|---|
| Power Source: AC 220 V, Three Phase, 50/60 Hz |
| Power Requirement: 21 kva |
| Overall Dimensions: 86″ x 65″ x 70″ High Approx. |
| Weight : 8,377 lbs Approx. |
