- Sorry, this product cannot be purchased.
Haas ST-20M CNC Turning Center – C-Axis Live Tool Lathe
Reserve your machine by paying: $999 (Refundable)
(We’ll hold it for 7 business days while you inspect or finalize your purchase)
$999
Location
CO
SKU
113691
Make
HAAS
Model
ST-20
Year
2013
Condition
Used
Video
On Request
In stock
| Location: | CO |
| SKU: | 113691 |
| Make: | HAAS |
| Model: | ST-20 |
| Year: | 2013 |
| Condition: | Used |
| Video: | On Request |
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
| Make: | Haas |
| Model: | ST-20M |
| Year: | 2013 |
| Equipped With: |
|---|
| Haas CNC Control |
| Royal Collet Chuck (Capable 10″ Chuck) |
| A2-6 Spindle Nose |
| 12-Station Live Tool Turret |
| C-Axis Live Tool |
| Tool Presetter |
| Parts Catcher |
| Rigid Tapping |
| Coolant Tank |
| Belt Type Chip Conveyor |
| Foot Switch |
| Note: Tool Holders Are Not Included With the Machine |
| Capacity: |
|---|
| Maximum Turning Diameter: 11.80″ |
| Maximum Swing Over Bed: 21.0″ |
| Maximum Turning Length: 22.5″ |
| Maximum Bar Capacity: 2.00″ |
| Travels: |
|---|
| X-Axis Travel: 8.4″ |
| Z-Axis Travel: 22.5″ |
| Feedrate: |
|---|
| Rapid Traverse X-Axis: 945 IPM |
| Rapid Traverse Z-Axis: 945 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-6 |
| Spindle Bore: 2.5″ |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 20 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 1 Second |
| Turret Type: VDI 40 (Live Tool) |
| General: |
|---|
| Air Requirement: 4 scfm @ 100 psi |
| Power Source: AC 195V – 260V / 3-Phase / 50/60 Hz |
| Machine Dimensions: 142.5″ × 90″ × 92″ High |
| Machine Weight: 8,820 lbs Approx. |
| Equipped With: |
|---|
| Haas CNC Control |
| Royal Collet Chuck (Capable 254 mm Chuck) |
| A2-6 Spindle Nose |
| 12-Station Live Tool Turret |
| C-Axis Live Tool |
| Tool Presetter |
| Parts Catcher |
| Rigid Tapping |
| Coolant Tank |
| Belt Type Chip Conveyor |
| Foot Switch |
| Note: Tool Holders Are Not Included With the Machine |
| Capacity: |
|---|
| Maximum Turning Diameter: 300 mm |
| Maximum Swing Over Bed: 533 mm |
| Maximum Turning Length: 572 mm |
| Maximum Bar Capacity: 51 mm |
| Travels: |
|---|
| X-Axis Travel: 213 mm |
| Z-Axis Travel: 572 mm |
| Feedrate: |
|---|
| Rapid Traverse X-Axis: 945 IPM |
| Rapid Traverse Z-Axis: 945 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-6 |
| Spindle Bore: 64 mm |
| Spindle Speed: 4,000 RPM |
| Spindle Motor: 20 HP |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 1 Second |
| Turret Type: VDI 40 (Live Tool) |
| General: |
|---|
| Air Requirement: 4 scfm @ 100 psi |
| Power Source: AC 195V – 260V / 3-Phase / 50/60 Hz |
| Machine Dimensions: 3,620 mm × 2,286 mm × 2,337 mm High |
| Machine Weight: 8,820 lbs Approx. |
| Make | Haas |
|---|---|
| Model | ST-20 |
| Categories | CNC Lathes & Turning Centers |
Payment Terms
A booking deposit secures the machine, with the remaining balance due prior to loading or shipment. We accept bank transfer, wire transfer, and approved payment methods.
Shipping & Logistics
We coordinate domestic and international shipping, including loading, containerization, and freight arrangements through trusted logistics partners.
Machine Inspection
Buyers can request a live video demonstration, machine inspection, or schedule an on-site visit before completing the purchase.
Export & Documentation
For international orders, we can assist with export documentation, commercial paperwork, and pre-shipment inspection requirements.
Related Products
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
You Might Like
New Arrival
New Arrival
New Arrival
New Arrival
New Arrival
