*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Samsung |
| Model: | SL 20/500 |
| Year: | 2012 |
| Condition: | Used – Good |
| Machine Type: | CNC Lathe / Turning Center |
| Control: | Fanuc Series 0i-TD CNC Control |
| Equipped With: |
|---|
| Fanuc Series 0i-TD CNC Control Panel |
| 10-Station Heavy Duty Hydraulic Turret |
| Automatic Tool Presetter Arm (Tool Setter) |
| Hydraulic Tailstock with Programmable Quill Assembly |
| 3-Jaw Hydraulic Chuck Unit |
| Hinge Type Right-Discharge Lift-Up Chip Conveyor |
| Automatic Way Lubrication System |
| High-Pressure Flood Coolant System with Tank & Pump |
| Fully Enclosed Guarding with Front Door Window |
| 3-Color Operator Status Signal Tower Light |
| Heavy Duty Hardened & Ground Box Way Construction |
| Capacity: |
|---|
| Swing Over Bed: 22.4″ |
| Swing Over Cross Slide: 15.7″ |
| Maximum Machining Diameter: 11.8″ |
| Maximum Machining Length: 21.3″ |
| Chuck Size: 8″ |
| Travels: |
|---|
| X-Axis Travel: 8.3″ |
| Z-Axis Travel: 21.7″ |
| Spindle: |
|---|
| Spindle Speed: 4,000 RPM |
| Spindle Nose: A2-6 |
| Spindle Bore: 2.99″ |
| Bar Capacity: 2.56″ |
| Spindle Motor: 20 HP |
| Turret: |
|---|
| Tool Capacity: 10-Station Turret |
| Turret Index Time: 0.15 Seconds |
| O.D. Tool Shank Size: 1.0″ |
| I.D. Boring Bar Diameter: 1.5″ |
| Tailstock: |
|---|
| Tailstock Travel: 21.3″ |
| Quill Diameter: 2.95″ |
| Quill Taper: MT #4 |
| General: |
|---|
| Air Required: 85 psi |
| Power Capacity: 26 kVA |
| Electrical Connection: 200/220 V / 3 Phase / 50&60 Hz |
| Overall Dimensions: 130″ L x 65″ W x 72″ High Approx. |
| Weight: 9,300 lbs Approx. |
